RII30815 - Certificate III

(Civil Construction Plant Operations)

This qualification reflects the role of a skilled operator working in civil construction, who applies a broad range of skills in a varied work context.

The qualification applies to specialist occupation in the area of Plant Operations.

General Course Info

  • Course Time Frame

    New Workers: Maximum 36 months under Queensland State Government Traineeship program. Where the learner is engaged outside of the Traineeship program, the 36 months still applies. Where a course runs over a reasonable timeframe, all efforts will be made to assist the participant through to completion, some situations may entail cancellation of enrolment. Where a course runs over a reasonable timeframe, all efforts will be made to assist the participant through to completion, some situations may entail cancellation of enrolment.

    Experienced Workers: 2-12 months (estimate)

    *The length of time taken to complete this Qualification is a variable, this is a guide only.  Some may take longer or shorter time depending on variables such as availability, access to supporting evidence, work commitments and changing roles in the workplace.

  • Entry Requirements

    Prior Qualifications: Nil

    Employment: You must currently be employed in the Civil Construction industry or have had a significant amount of experience and access to paperwork to demonstrate your experience.

  • Funding

    State: To be eligible for the User Choice Program which is a Queensland initiative where the Government subsides the cost of your training: You must not have completed a Qualification at the same level or higher level as the one you are enrolling in within the last 7 years, and must be an Australian Citizen, Permanent Resident or be a New Zealand passport holder who has resided in Australia for 6 months or more.

    Federal: Federal funding is an incentive program for Employers who support their Employees within a Traineeship arrangement. Employer may be eligible for Incentives if the learner is newly employed with the company; i.e. Under 3 month’s fulltime and less than 12 months part time/casual. They must not have a Cert 3 or 4 completed in the last 7 years (qualifications completed through school are exempted), If they have a Diploma or higher (including a degree), they are ineligible (regardless if the degree is for a different industry) and must be an Australian Citizen, Permanent Resident or NZ passport holder who has resided in Australia for 6 months or more.

    Student Contribution Fees: SCT’s or Tuition Fees are charged to the Trainee to encourage contribution to their own future pathways.  For this Qualification the range of fees are $1000 - $2500.  KASE accepts payment plans and credit card payments. 

    For example: A Trainee who takes 18 months to complete their Qualification and the SCT fee is $1500, the payment plan would be $83.33 per month. SCT fees are calculated at $1.60 per nominal hour of the competencies selected within a Qualification, this varies for each individual and will be explained upon Induction.  Employers often opt to contribute to this fee on behalf of their worker.

    Fee for service fees:  Each fee is calculated on a case by case basis, the minimum fee for this Qualification is $2500; where a learner would have significant experience and is not in a remote location.  The maximum fee for this Qualification is $5000. Travel and accommodation costs, where applicable, are additional to the minimum and maximum fee, this will be negotiated prior to enrolment via written notification.  The fee for service fees are split into 2 payments, maximum $1500.00 deposit prior to commencement and the balance upon completion.  The full amount of the fee for service fee must be paid prior to KASE issuing the Certificate.

    Fee for service deposits: There is a pre-paid deposit required for FFS Learners prior to enrolment, this is non-refundable after the cooling off period (see below).  The pre-paid deposit amount will not exceed $1500.00 on any given enrolment

    Refunds: FFS pre-paid deposit payments are refundable if requested within the cooling off period (see below), after this period, they are non-refundable.

    SCT fees are refundable only for the hours not completed within the Qualification and which have been pre-paid.  Monies paid for nominal hours completed are not refundable, nominal hours are explained further once a Training Plan is generated.

    Cooling off period: Where payment has been made for a fee for service arrangement, KASE will hold the fee amount in trust for 10 days, after which the deposit is non-refundable.

  • Credit

    Where you have already achieved units that are equivalent to or higher than the units within this Qualification, you will be granted a credit when you submit a copy of your previous Qualification and when this evidence is verified.
  • Issuing Your Certificate

    KASE will issue your Certificate within 30 calendar days of completion of all assessment and paperwork requirements. Where you have not completed all components of a Qualification, you will be issued with a Statement of Attainment listing the units you have achieved in full.  These documents will be kept for a period of 30 years, and you can access them by requesting a copy directly from KASE.
  • Support Services

    Where applicable, KASE will direct you to the appropriate support services relevant to any support the individual may need that KASE cannot provide; this includes significant Learning, Literacy and Numeracy support needs or Government specific questions.  It is the responsibility of the learner to discover these costs with the relevant body.
  • Consumer / RTO Rights

    Consumer Rights

    The ACCC states that services must:

    • be provided with acceptable care and skill or technical knowledge and taking all necessary steps to avoid loss and damage
    • be fit for the purpose or give the results that you and the business had agreed to
    • be delivered within a reasonable time when there is no agreed end date

     Where a consumer considers these guidelines were not met, please refer to our Appeals/Complaints Policy found at www.kase.com.au 

    Please be aware that consumer guarantees do not apply where the consumer:

    • asked for a service to be done in a certain way against the advice of the business or were unclear about what you wanted
    • got what you asked for but simply changed your mind, found it cheaper somewhere else, decided you did not like the purchase or had no use for it.

    RTO Rights

    The RTO reserves the right to refuse engagement with a client where it sees it is unable to deliver satisfactory service, this might be due to location of the learner or exorbitant costs to the RTO, or for any other reason; this is at the RTO’s discretion. The RTO further reserves the right to refuse or withdraw enrolment where it has deemed the client unfit to enrol or where continuation of the course would result in non-compliance with the relevant Standards, State Bodies or Qualification requirements, or for any other reason the RTO sees as significant.  Where this situation would occur, the RTO will notify the appropriate party via written correspondence.  The recipient has the opportunity to submit a compliant or appeal using our Appeals/Complaints Policy and Procedure found on our website. Where this occurs, the issue will be dealt with through the established Appeals/Complaints Policy.

  • 1

Course Units

  • Plant Operations - Core Units

    Unit code

    Unit title

    RIIBEF201D

    Plan and organise work

    RIICOM201D

    Communicate in the workplace

    RIICCM201D

    Carry out measurements and calculations

    RIICCM202D

    Identify, locate and protect underground services

    RIICCM203D

    Read and interpret plans and specifications

    RIICCM205E

    Carry out manual excavation

    RIICCM206D Support plant operations
    RIICCM207D Spread and compact materials manually
    RIICCM208D Carry out basic levelling
    RIISAM201D Handle resources and infrastructure materials and safely dispose of nontoxic materials

    RIISAM203D

    Use hand and power tools

    RIISAM204D

    Operate small plant and equipment

    RIIWMG203D

    Drain and dewater civil construction site

    RIIWHS201D

    Work safely and follow WHS policies and procedures

    Go to top of page ^

  • Plant Operations - Electives (A)

    Unit code 

    Unit title 

    RIIMPO318E

    Conduct civil construction skid steer loader operations

    RIIMPO319D

    Conduct backhoe/loader operations

    RIIMPO320E

    Conduct civil construction excavator operations

    RIIMPO321E

    Conduct civil construction wheeled front end loader operations

    RIIMPO322D

    Conduct civil construction tracked front end loader operations

    RIIMPO323D

    Conduct civil construction dozer operations

    RIIMPO324E

    Conduct civil construction grader operations

    RIIMPO325D

    Conduct civil construction scraper operations

    RIIMPO327D

    Conduct pipe layer operations

    Go to top of page ^

  • Plant Operations - Electives (B)

    Unit code 

    Unit title 

    RIICRC308D

    Conduct paver operations

    RIICRC309D

    Conduct stabiliser operations

    RIIHAN309E

    Conduct telescopic materials handler operations

    RIIHAN311E

    Conduct operations with integrated tool carrier

    RIIMPO315D

    Conduct tractor operations

    RIIMPO316D

    Conduct self propelled compactor operations

    RIIMPO317E

    Conduct roller operations

    RIIMPO326D

    Conduct civil construction water cart operations

    RIIMPO336D

    Conduct belly dump truck operations

    RIIMPO337D

    Conduct articulated truck operations

    RIIMPO338D

    Conduct rigid haul truck operations

    Go to top of page ^

  • Plant Operations - Electives (C)

    Unit code 

    Unit title 

    CPCCCM2007B

    Use explosive power tools

    • Prerequisite unit: CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry

    RIICCM204D

    Place and fix reinforcement materials

    RIICCM209D

    Carry out concrete work

    RIICCM210D

    Install trench support

    RIICCM211D

    Erect and dismantle temporary fencing and gates

    RIICRC201D

    Repair potholes

    RIICRC208D

    Lay pipes

    RIIHAN208D

    Perform dogging

    RIIHAN211D

    Conduct basic scaffolding operations

    RIIHAN301D

    Operate elevating work platform

    RIIHAN308E

    Load and unload plant

    RIIWHS205D

    Control traffic with stop-slow bat

    RIIRIS201D

    Conduct local risk control

    RIIRIS202D

    Respond to site based spills

    RIISAM205D

    Cut, weld and bend materials

    RIISAM213D

    Position and set up mobile lighting

    RIIWHS202D

    Enter and work in confined spaces

    RIIWHS204D

    Work safely at heights

    Go to top of page ^

  • 1

Contact Us!

We're here to help, so please use the contact form below or click / tap the links at the very top of this page to contact us and we'll get back to you as quickly as possible!

Testimonials

  • Niki from Cardno

    Cardno Construction Sciences have worked closely with Kase Enterprises for more than 3 Years. Steve Cusack has worked tirelessly to produce the most relevant training package available for soil testers in Australia. Kase Trainers have been soil testers and are passionate about the industry. They engage our technicians on their level and they understand their learning requirements too. There is a widespread preference within many of our Construction materials testing labs for using Kase enterprises because they turn out better soil testers and are willing to collaborate with employers to find the best training solutions.

  • 1
  • 2
  • 3

Contacts

  This email address is being protected from spambots. You need JavaScript enabled to view it.
  (07) 3343 3733
  Unit 2 / 8 Nevilles St, Underwood, Queensland
   View our Terms & Conditions
    View our complaints policy or download the for
    View our Student Handbook